Intermediate Signal Throw Event
Add, copy, delete, change the color, align, and configure Intermediate Signal Throw Event elements in your Process model.
Don't Know What an Intermediate Signal Throw Event Element Is?
See Process Modeling Element Descriptions for a description of the Intermediate Signal Throw Event element.
Add an Intermediate Signal Throw Event Element
Add an Intermediate Signal Throw Event element from one of the following locations in Process Modeler:
Object Panel: Located to the left of the Process Modeler canvas, the Object Panel contains various process model objects.
Object Bar: Located at the bottom of the Process Modeler canvas, the Object Bar contains pinned Process model objects for quick access.
Follow these steps to add an Intermediate Signal Throw Event element from the Object panel to the Process model:
Click the Intermediate Event object from one of the following sections:
Pinned Objects: The Intermediate Event object appears in the Pinned Objects section when it is pinned.
Click the location in the Process model to place this element. Follow these guidelines when placing this element:
Optionally place this element between two existing Process model objects already connected with a Sequence Flow element. See Place an object between two connected objects.
If a Pool element is in your Process model, the Intermediate Timer Event element cannot be placed outside of the Pool element.
Replace an Intermediate Signal Throw Event Element with a Different Intermediate Request Event Element
After an Intermediate Signal Throw Event element is added to a Process model, you may replace it with a different intermediate Request event element:
Intermediate Timer Event element
Intermediate Signal Catch Event element
Intermediate Message Catch Event element
Intermediate Message Throw Event element
The selected Intermediate Signal Throw Event element is replaced by the default settings and color of the replacing element.
Follow these steps to replace an Intermediate Signal Throw Event element with a different Intermediate-type event element:
Select the Intermediate Signal Throw Event element to change to another Intermediate-type event element. Available options display above the selected element.
Click Confirm. The new element replaces the Intermediate Signal Throw Event element with its default settings and color.
Settings
The Intermediate Signal Throw Event element has the following panels that contain settings:
Documentation panel
Advanced panel
Configuration Panel Settings
Edit the Element Name
An element name is a human-readable reference for a Process element. Process Modeler automatically assigns the name of a Process element with its element type. However, an element's name can be changed.
Follow these steps to edit the name for an Intermediate Signal Throw Event element:
Select the Intermediate Signal Throw Event element from the Process model in which to edit its name.
Ensure that the Configuration panel displays. If not, show it. The Name setting displays. This is a required setting.
In the Name setting, edit the selected element's name and then press Enter.
Select the Signal the Element Broadcasts
An Intermediate Signal Throw Event element broadcasts a specific Signal that contains part or all of its current Request data when it triggers to all elements throughout that ProcessMaker Platform instance listening for that Signal. The element that listens for the broadcast Signal does not need to be in the same Process model as the Intermediate Signal Throw Event element. Select the Signal that this element broadcasts.
Follow these steps to select the Signal that the Intermediate Signal Throw Event element broadcasts:
Select the Intermediate Signal Throw Event element from the Process model in which to select the Signal that it broadcasts.
Ensure that the Configuration panel displays. If not, show it. Panels to configure this element display.
Do one of the following:
The Signal to trigger this element exists:
From the Signal drop-down menu, select the Signal that triggers this element. This setting is required.
The Signal to trigger this element does not exist:
In the ID setting, enter the unique ID of this Signal. The Signal ID may only contain non-special characters and without spaces. This Signal ID must be unique from all other signal IDs. If the entered Signal ID already exists, the following text displays below the setting: Signal ID is duplicated. Note that the Signal ID cannot be edited after the Signal is created. Consider the following when entering the Signal ID value:
Signal IDs must be unique and accept alphanumeric characters only.
A Signal that corresponds with a User Signal must have the Signal ID value that corresponds with that User Signal's event. See What is a User Signal?. Ensure that the User Signal is enabled for use.
This is a required setting.
In the Name setting, enter the unique alphanumeric name of this Signal. This Signal name must be unique from all other Signal names. This Signal name displays when selecting a Signal from other elements that can broadcast or listen for a Signal. If the entered Signal name already exists, the following text displays below the setting: Signal Name is duplicated. This is a required setting.
Click Save. The Signal is created.
From the Signal drop-down menu, select the new Signal that triggers this element. This setting is required.
Save your Process model. The new Signal is added to Signal Manager.
Edit the Name of a Signal
Editing the name of a Signal changes that signal's name. This Signal name displays when selecting a Signal from other elements that can broadcast or listen for a Signal.
Follow these steps to edit the name of a Signal:
Select any element from the Process model that broadcasts or listens for a Signal.
Ensure that the Configuration panel displays. If not, show it. Panels to configure this element display.
In the Name setting, edit the name of the Signal as necessary.
Click Save.
Save your Process model. The name of the Signal also changes in Signal Manager.
Delete a Signal from the Instance
A Signal cannot be delete if any other Signal subscribes to it. When attempting to delete a Signal with any subscribing element, a message displays with which element(s) subscribes to that Signal.
Carefully consider whether to delete a Signal. Deleting a Signal makes that Signal unavailable when configuring all elements that broadcast or listen to Signals throughout your ProcessMaker Platform instance.
Deleting a Signal cannot be undone.
Follow these steps to delete a Signal:
Select any element from the Process model that broadcasts or listens for a Signal.
Ensure that the Configuration panel displays. If not, show it. Panels to configure this element display.
If the Signal is subscribed to by another element anywhere in your ProcessMaker Platform instance, that Signal cannot be deleted. A message displays by which element(s) subscribes to this Signal.
Click Delete.
Save your Process model. The Signal is also deleted from Signal Manager.
Select the Contents of the Broadcasting Signal's Payload
Configure the contents of the broadcasting Signal's payload when the Intermediate Signal Throw Event element triggers:
Send no Request data in the Signal's payload, thereby sending no data. All elements configured to listen for the broadcasting Signal trigger, but no data from the Intermediate Signal Throw Event element's Request can be referenced from the receiving element.
Send all current Request data in the Signal's payload.
Send the current value of a specified Request variable in the Signal's payload.
Follow these steps to select the contents of the Signal's payload that the Intermediate Signal Throw Event element broadcasts:
Select the Intermediate Signal Throw Event element from the Process model in which to select contents of the Signal's payload.
Ensure that the Configuration panel displays. If not, show it. Panels to configure this element display.
From the Signal Payload drop-down menu, select one of the following options:
No Request Data: Select No Request Data to send no Request data in the Signal's payload.
All Request Data: Select All Request Data to send all current Request data in the Signal's payload.
Documentation Panel Settings
Edit the Element's Description Displayed in Process Documentation
Describe the element's purpose and how it functions in the Process. This description does not affect Requests for the Process, but may be useful for Process model maintenance such as how the element is configured. Edit information by using the What-You-See-Is-What-You-Get (WYSIWYG) rich text editor.
A Process's entered documentation displays by selecting the View Documentation icon for that Process.
Follow these steps to edit the description for an element:
Select the element from the Process model in which to edit its description.
Ensure that the Configuration panel displays. If not, show it. Panels to configure this element display.
Follow these guidelines to use the WYSIWYG rich text editor to stylize your text:
Select the required text from the Rich Text control.
In the URL setting, enter the destination URL.
In the Text to display setting, edit or enter the text displayed in the Rich Text control.
In the Title setting, enter the text to display when a user hovers over the displayed text.
From Open link in… drop-down menu, select one of these options:
New window: Select this option to open the destination page in a new browser window.
Current window: Select this option to open the destination page in the current browser window.
In the Source setting, enter a URL for the image.
In the Alternative Description setting, enter the text to display if the source URL of the image is not accessible.
In the Width setting, enter the maximum width for the image.
In the Height setting, enter the maximum height for the image.
Click Save.
Format text: Follow these guidelines to format text:
Headings: From the Paragraph/Formats menu, select Headings and then select a heading size.
Bold: Do one of the following:
From the Paragraph/Formats menu, select Inline and then Bold.
Italics: Do one of the following:
From the Paragraph/Formats menu, select Inline and then Italic.
Underline: From the Paragraph/Formats menu, select Inline and then Underline.
Strikethrough: From the Paragraph/Formats menu, select Inline and then Strikethrough.
Superscript: From the Paragraph/ Formats menu, select Inline and then Superscript.
Subscript: From the Paragraph/Formats menu, select Inline and then Subscript.
Code: From the Paragraph/Formats menu, select Inline and then Code.
Paragraph: From the Paragraph/Formats menu, select Blocks and then Paragraph.
Blockquote: From the Paragraph/Formats menu, select Blocks and then Blockquote.
Division: From the Paragraph/Formats menu, select Blocks and then Div.
Preformatted: From the Paragraph/Formats menu, select Blocks and then Pre.
Select one of the color swatches from the color palette. The selected text changes to that color.
Align text: Follow these guidelines to align text:
Left align: Do one of the following:
From the Paragraph/Formats menu, select Align and then Left.
Center align: Do one of the following:
From the Paragraph/Formats menu, select Align and then Center.
Right align: Do one of the following:
From the Paragraph/Formats menu, select Align and then Right.
Justify: Do one of the following:
From the Paragraph/Formats menu, select Align and then Justify.
Advanced Panel Settings
Edit the Node's Identifier Value
Process Modeler automatically assigns a unique value to each Process node added to a Process model. However, a node's identifier value can be changed if it is unique to all other nodes in the Process model, including the Process model's identifier value.
All identifier values for all nodes in the Process model must be unique.
Follow these steps to edit the identifier value for an Intermediate Signal Throw Event element:
Select the Intermediate Signal Throw Event element from the Process model in which to edit its identifier value.
Ensure that the Configuration panel displays. If not, show it. Panels to configure this element display.
In the Node Identifier setting, edit the Intermediate Signal Throw Event element's identifier to a unique value from all nodes in the Process model and then press Enter.
Last updated