Intermediate Message Catch Event
Add, copy, delete, change the color, align, and configure Intermediate Message Catch Event elements in your Process model.
Don't Know What an Intermediate Message Catch Event Element Is?
See Process Modeling Element Descriptions for a description of the Intermediate Message Catch Event element.
Add an Intermediate Message Catch Event Element
Add an Intermediate Message Catch Event element from one of the following locations in Process Modeler:
Object Panel: Located to the left of the Process Modeler canvas, the Object Panel contains various process model objects.
Object Bar: Located at the bottom of the Process Modeler canvas, the Object Bar contains pinned Process model objects for quick access.
Follow these steps to add an Intermediate Message Catch Event element from the Object panel to the Process model:
Click the Intermediate Event object from one of the following sections:
Pinned Objects: The Intermediate Event object appears in the Pinned Objects section when it is pinned.
Click the location in the Process model to place this element. Follow these guidelines when placing this element:
Optionally place this element between two existing Process model objects already connected with a Sequence Flow element. See Place an object between two connected objects.
If a Pool element is in your Process model, the Intermediate Timer Event element cannot be placed outside of the Pool element.
Replace an Intermediate Message Catch Event Element with a Different Intermediate Request Event Element
After an Intermediate Message Catch Event element is added to a Process model, you may replace it with a different intermediate Request event element:
Intermediate Timer Event element
Intermediate Signal Catch Event element
Intermediate Signal Throw Event element
Intermediate Message Throw Event element
The selected Intermediate Message Catch Event element is replaced by the default settings and color of the replacing element.
Follow these steps to replace an Intermediate Message Catch Event element with a different intermediate Request event element:
Select the Intermediate Message Catch Event element to change to another intermediate Request event element. Available options display above the selected element.
Click Confirm. The new element replaces the Intermediate Message Catch Event element with its default settings and color.
Settings
The Intermediate Message Catch Event element has the following panels that contain settings:
Configuration panel
Documentation panel
Vocabularies panel
Advanced panel
Configuration Panel Settings
Edit the Element Name
An element name is a human-readable reference for a Process element. Process Modeler automatically assigns the name of a Process element with its element type. However, an element's name can be changed.
Follow these steps to edit the name for an Intermediate Message Catch Event element:
Select the Intermediate Message Catch Event element from the Process model in which to edit its name.
Ensure that the Configuration panel displays. If not, show it. The Name setting displays. This is a required setting.
In the Name setting, edit the selected element's name and then press Enter.
Select the Element from Which to Listen for a Message
An Intermediate Message Catch Event element pauses a Request until that element receives a message from either an Intermediate Message Throw Event element or a Message End Event element (but not both) located in a different Pool element than the Intermediate Message Catch Event element receiving the message. After the Intermediate Message Catch Event element receives its message, that element triggers. Select from which element to listen for a message based on the Intermediate Message Throw Event or Message End Event element's Message Name setting value.
Follow these steps to select the element from which to listen for a message:
Select the Intermediate Message Catch Event element from the Process model in which to configure how it is triggered.
Ensure that the Configuration panel displays. If not, show it. Panels to configure this element display.
From the Listen For Message drop-down menu, select from which Intermediate Message Throw Event element or End Event element triggers the Intermediate Message Catch Event element.
Documentation Panel Settings
Edit the Element's Description Displayed in Process Documentation
Describe the element's purpose and how it functions in the Process. This description does not affect Requests for the Process, but may be useful for Process model maintenance such as how the element is configured. Edit information by using the What-You-See-Is-What-You-Get (WYSIWYG) rich text editor.
A Process's entered documentation displays by selecting the View Documentation icon for that Process.
Follow these steps to edit the description for an element:
Select the element from the Process model in which to edit its description.
Ensure that the Configuration panel displays. If not, show it. Panels to configure this element display.
Follow these guidelines to use the WYSIWYG rich text editor to stylize your text:
Select the required text from the Rich Text control.
In the URL setting, enter the destination URL.
In the Text to display setting, edit or enter the text displayed in the Rich Text control.
In the Title setting, enter the text to display when a user hovers over the displayed text.
From Open link in… drop-down menu, select one of these options:
New window: Select this option to open the destination page in a new browser window.
Current window: Select this option to open the destination page in the current browser window.
In the Source setting, enter a URL for the image.
In the Alternative Description setting, enter the text to display if the source URL of the image is not accessible.
In the Width setting, enter the maximum width for the image.
In the Height setting, enter the maximum height for the image.
Click Save.
Format text: Follow these guidelines to format text:
Headings: From the Paragraph/Formats menu, select Headings and then select a heading size.
Bold: Do one of the following:
From the Paragraph/Formats menu, select Inline and then Bold.
Italics: Do one of the following:
From the Paragraph/Formats menu, select Inline and then Italic.
Underline: From the Paragraph/Formats menu, select Inline and then Underline.
Strikethrough: From the Paragraph/Formats menu, select Inline and then Strikethrough.
Superscript: From the Paragraph/ Formats menu, select Inline and then Superscript.
Subscript: From the Paragraph/Formats menu, select Inline and then Subscript.
Code: From the Paragraph/Formats menu, select Inline and then Code.
Paragraph: From the Paragraph/Formats menu, select Blocks and then Paragraph.
Blockquote: From the Paragraph/Formats menu, select Blocks and then Blockquote.
Division: From the Paragraph/Formats menu, select Blocks and then Div.
Preformatted: From the Paragraph/Formats menu, select Blocks and then Pre.
Select one of the color swatches from the color palette. The selected text changes to that color.
Align text: Follow these guidelines to align text:
Left align: Do one of the following:
From the Paragraph/Formats menu, select Align and then Left.
Center align: Do one of the following:
From the Paragraph/Formats menu, select Align and then Center.
Right align: Do one of the following:
From the Paragraph/Formats menu, select Align and then Right.
Justify: Do one of the following:
From the Paragraph/Formats menu, select Align and then Justify.
Vocabularies Panel Settings
Assign Vocabularies That Validate Request Data from This Element
Assign Vocabularies that validate Request data complies with a specific JSON schema. This is often mandatory for many types of business sectors including banking and healthcare. Ensure the quality and compliance of Request data. For example, during a Loan Application process, ensure that personal information has been included in the Request to that moment in that in-progress Request.
Use a Vocabulary on an Intermediate Message Catch Event element to validate Request data complies with the Vocabulary's JSON schema. See What is a Vocabulary? for more information.
Each moment ProcessMaker evaluates workflow routing for an in-progress Request, ProcessMaker Platform also evaluates the Request data's conformity to the Vocabularies applied to the Process and/or a specific BPMN 2.0 element in the Process model. The Request's JSON data model must conform to the ProcessMaker Vocabulary's JSON schema.
During an in-progress Request, if ProcessMaker Platform evaluates that the Request data no longer complies with all Vocabularies to that moment, the Request status changes from In Progress to Error. The error displays in the Request summary. Vocabularies are cumulative in an in-progress Request: as the Request progresses, if Request data does not conform with any Vocabulary's JSON schema to that moment in the Request, the Request errors.
If no Vocabularies are assigned, ProcessMaker Platform does not validate Request data complies with a specific JSON schema prior to continuing workflow for that Request.
One or more Vocabularies must be created to your ProcessMaker Platform instance before assigning a Vocabulary. See Create a New Vocabulary. Multiple Vocabularies can be assigned to a Start Event element.
Follow these steps to assign Vocabularies that validate Request data from an Intermediate Message Catch Event element:
Select the Intermediate Message Catch Event element from the Process model in which to assign Vocabularies that validate Request data prior to when this element completes.
Ensure that the Configuration panel displays. If not, show it. Panels to configure this element display.
Expand the Vocabularies panel if it is not presently expanded. The Assigned setting displays.
From the Select Vocabulary drop-down menu, select a Vocabulary from which to validate Request data complies with its JSON schema.
If no Vocabularies are configured in your ProcessMaker Platform instance, then the following message displays: List is empty. Create at least one Vocabulary. See Create a New Vocabulary.
Click Save.
Repeat Steps 3 through 6 as necessary for each Vocabulary required to validate Request data complies with its JSON schema.
After one or more Vocabularies are assigned to an Intermediate Message Catch Event element, the Vocabulary icon displays above that element.
Advanced Panel Settings
Edit the Node's Identifier Value
Process Modeler automatically assigns a unique value to each Process node added to a Process model. However, a node's identifier value can be changed if it is unique to all other nodes in the Process model, including the Process model's identifier value.
All identifier values for all nodes in the Process model must be unique.
Follow these steps to edit the identifier value for an Intermediate Message Catch Event element:
Select the Intermediate Message Catch Event element from the Process model in which to edit its identifier value.
Ensure that the Configuration panel displays. If not, show it. Panels to configure this element display.
Expand the Advanced panel if it is not presently expanded. The Node Identifier setting displays. This is a required setting.
In the Node Identifier setting, edit the Intermediate Message Catch Event element's identifier to a unique value from all nodes in the Process model and then press Enter.
Last updated