Slack Notification Connector
Send automatic notifications to Slack channels during Requests.
What is the Slack Notification Connector?
When you add the Slack Notification connector to your Process model and then select to which Slack channel to send a notification, ProcessMaker Platform can automatically send notifications via Slack during Requests.
Grant ProcessMaker Platform Access to Your Slack Workspace
Before using the Slack Notification connector in your Process models, your ProcessMaker Platform instance must be granted access to your Slack workspace by building a Slack App. Ask your Slack administrator to help you with the following:
Otherwise, when configuring the Slack Notification connector, the following ProcessMaker Platform error displays: Request failed with status code 404.
Add a Slack Notification Connector to the Process Model
Add a Slack Notification connector from one of the following locations in Process Modeler:
Object Panel: Located to the left of the Process Modeler canvas, the Object Panel contains various process model objects.
Object Bar: Located at the bottom of the Process Modeler canvas, the Object Bar contains pinned Process model objects for quick access.
Follow these steps to add a Slack Notification connector from the Object panel to the Process model:
Click the Slack Notification object from one of the following sections:
Pinned Objects: The Slack Notification object appears in the Pinned Objects section when it is pinned.
Click the location in the Process model to place this connector. Follow these guidelines when placing this connector:
Optionally place this connector between two existing Process model objects already connected with a Sequence Flow element. See Place an object between two connected objects.
Settings
The Slack Notification connector has the following panels that contain settings:
Loop Characteristics panel
Documentation panel
Configuration Panel Settings
The Slack Notification connector has the following settings in the Configuration panel:
Edit the Connector Name
A connector name is a human-readable reference for a Process model control. Process Modeler automatically assigns the name of a Process model connector with its connector type. However, a connector's name can be changed.
Follow these steps to edit the name for a Data Connector connector:
Select the Slack Notification connector from the Process model in which to edit its name.
In the Name setting, edit the selected connector's name and then press Enter.
Select the Slack Channel to Send the Notification
Select to which Slack channel to send the notification. Slack channels are only available for the Slack workspace that your ProcessMaker instance is granted access.
Follow these steps to select to which Slack channel to send the notification:
Select the Slack Notification connector from the Process model in which to edit its name.
Ensure that the Configuration panel displays. If not, show it. Panels to configure this element display.
From the Select a Slack Channel drop-down menu, select the Slack channel to send the notification.
Enter the Slack Notification Message to Send
Follow these steps to enter the Slack notification message to send:
Select the Slack Notification connector from the Process model in which to edit its name.
Ensure that the Configuration panel displays. If not, show it. Panels to configure this element display.
In the Input Your Message setting, enter the notification message and then press Enter.
Loop Characteristics Panel Settings
Specify Characteristics to Perform Multiple Instances of the Task
Use the Loop Characteristics panel settings to specify how to perform multiple instances of this element. The following loop modes are available for this element:
No Loop Mode: Select the No Loop Mode option to perform this element's Task only once.
Loop: Select the Loop option to sequentially repeat this element's Task multiple times until an exit condition is
True
. This is useful when a Task should be performed multiple times with the same set of data, such as, processing a credit card payment. This loop mode has the following characteristics:The element's Task is repeated until the exit condition is
True
or the maximum iterations limit is reached.At any given time, only one instance of the Task is active. The subsequent instance does not begin until the current instance completes.
The same exit condition evaluates at the end of each instance; however, value(s) of the Request variable(s) used in the exit condition can change during an instance resulting in the exit condition to eventually evaluate as
True
.If any one instance of that Task does not complete, workflow pauses.
All active instances are terminated if an interrupting boundary-type event element triggers.
Multi-instance (Parallel): Select the Multi-instance (Parallel) option to perform this element's Task multiple times in parallel a fixed number of times. This is useful when performing any action in bulk, such as sending an email to several people. This loop mode has the following characteristics:
Instances of the Task are governed by the size of an array-type Request variable where a new instance is created for each item in this variable. For example, an array with 10 items will create 10 parallel instances of this Task that each contains data from its respective array index.
All instances begin simultaneously when this element triggers; however, they perform their Task independently of each other.
The Task as a whole completes when all instances are complete.
The output from each instance can either be saved in the source Request variable or a new array-type Request variable.
All active instances terminate if an interrupting boundary-type event element triggers.
Multi-instance (Sequential): Select the Multi-instance (Sequential) option to perform this element's Task multiple times sequentially a fixed number of times or until an exit condition is
True
. This is useful when sequentially repeating a Task multiple times but with a different set of data each time. This loop mode has the following characteristics:Instances of the Task are governed by the size an array-type Request variable where a new instance is created for each item in this variable. For example, an array with 10 items will create 10 parallel instances of this Task that each contains data from its respect array index.
At any given time, only one instance of the Task is active. The subsequent instance does not begin until the current instance completes.
At the end of each instance an exit condition evaluates and the loop activity halts if the exit condition is
True
.The Task as a whole completes when all instances are complete.
The output from each instance can either be saved in the source Request variable or a new array-type Request variable.
All active instances terminate if an interrupting boundary-type event element triggers.
Follow these steps to specify characteristics to perform multiple instances of the Task:
Select the element from the Process model in which to specify multiple instance characteristics.
Ensure that the Configuration panel displays. If not, show it. Panels to configure this element display.
Expand the Loop Characteristics panel. The Loop Characteristics setting displays. By default, Loop Activity is set to No Loop Mode and the Task is performed only once.
From the Loop Mode setting, select one of the following options to perform this element's Task more than once.
Loop: Select the Loop option. The settings for this loop mode display:
Follow these steps:
In the Maximum Iterations setting, enter an integer value representing the maximum number of times this Task should be performed.
In the Exit Condition setting, enter a condition in FEEL syntax. When this condition is True the loop activity is halted.
Multi-instance (Parallel): Select the Multi-instance (Parallel) option. The settings for this loop mode display:
Follow these steps:
In the Request Variable Array setting, enter the name of an array-type Request Variable. The size of this array will determine how many times this loop iterates.
In the Output Data Variable setting, enter the name of an array-type Request variable in which to store the results of all instances. Each instance of the loop saves to a separate JSON object within the array of the specified Request variable. If the Output Data Variable setting is not configured, then the output data replaces the source data in the Request Variable Array.
Multi-instance (Sequential): Select the Multi-instance (Sequential) option. The settings for this loop mode display:
Follow these steps:
In the Request Variable Array setting, enter the name of an array-type Request Variable. The size of this array will determine how many times this loop iterates.
In the Exit Condition setting, enter a condition in FEEL syntax. When this condition is True the loop activity is halted.
In the Output Data Variable setting, enter the name of an array-type Request variable in which to store the results of all instances. Each instance of the loop saves to a separate JSON object within the array of the specified Request variable. If the Output Data Variable setting is not configured, then the output data replaces the source data in the Request Variable Array.
Documentation Panel Settings
Edit the Connector's Description Displayed in Process Documentation
Describe the connector's purpose and how it functions in the Process. This description does not affect Requests for the Process, but may be useful for Process model maintenance such as how the connector is configured. Edit information by using the What-You-See-Is-What-You-Get (WYSIWYG) rich text editor.
A Process's entered documentation displays by selecting the View Documentation icon for that Process.
Follow these steps to edit the description for a connector:
Select the connector from the Process model in which to edit its description.
Ensure that the Configuration panel displays. If not, show it. Panels to configure this element display.
Follow these guidelines to use the WYSIWYG rich text editor to stylize your text:
Select the required text from the Rich Text control.
In the URL setting, enter the destination URL.
In the Text to display setting, edit or enter the text displayed in the Rich Text control.
In the Title setting, enter the text to display when a user hovers over the displayed text.
From Open link in… drop-down menu, select one of these options:
New window: Select this option to open the destination page in a new browser window.
Current window: Select this option to open the destination page in the current browser window.
In the Source setting, enter a URL for the image.
In the Alternative Description setting, enter the text to display if the source URL of the image is not accessible.
In the Width setting, enter the maximum width for the image.
In the Height setting, enter the maximum height for the image.
Click Save.
Format text: Follow these guidelines to format text:
Headings: From the Paragraph/Formats menu, select Headings and then select a heading size.
Bold: Do one of the following:
From the Paragraph/Formats menu, select Inline and then Bold.
Italics: Do one of the following:
From the Paragraph/Formats menu, select Inline and then Italic.
Underline: From the Paragraph/Formats menu, select Inline and then Underline.
Strikethrough: From the Paragraph/Formats menu, select Inline and then Strikethrough.
Superscript: From the Paragraph/ Formats menu, select Inline and then Superscript.
Subscript: From the Paragraph/Formats menu, select Inline and then Subscript.
Code: From the Paragraph/Formats menu, select Inline and then Code.
Paragraph: From the Paragraph/Formats menu, select Blocks and then Paragraph.
Blockquote: From the Paragraph/Formats menu, select Blocks and then Blockquote.
Division: From the Paragraph/Formats menu, select Blocks and then Div.
Preformatted: From the Paragraph/Formats menu, select Blocks and then Pre.
Select one of the color swatches from the color palette. The selected text changes to that color.
Align text: Follow these guidelines to align text:
Left align: Do one of the following:
From the Paragraph/Formats menu, select Align and then Left.
Center align: Do one of the following:
From the Paragraph/Formats menu, select Align and then Center.
Right align: Do one of the following:
From the Paragraph/Formats menu, select Align and then Right.
Justify: Do one of the following:
From the Paragraph/Formats menu, select Align and then Justify.
Last updated