Add, copy, delete, change the color, align, and configure Conditional Start Event elements in your Process model.
See Process Modeling Element Descriptions for a description of the Conditional Start Event element.
Add a Conditional Start Event element from one of the following locations in Process Modeler:
Object Panel: Located to the left of the Process Modeler canvas, the Object Panel contains various process model objects.
Object Bar: Located at the bottom of the Process Modeler canvas, the Object Bar contains pinned Process model objects, which are easy accessible.
Follow these steps to add a Conditional Start Event element from the Object panel to the Process model:
Click the Start Event object from one of the following sections:
Pinned Objects: The Start Event object appears in the Pinned Objects section when it is pinned.
Click the location in the Process model to place this element. If a Pool element is in your Process model, the Start Timer Event element cannot be placed outside of the Pool element.
Follow these steps to add a Conditional Start Event element from the Object bar to the Process model:
Ensure that the object is pinned to the Object bar. If not, pin it.
In the Object bar at the bottom center, click the object's icon. This object's icon displays adjacent to the mouse icon to indicate this Start Event may be placed into the Process model.
Click the location in the Process model to place this element. If a Pool element is in your Process model, the Start Event element cannot be placed outside of the Pool element.
After a Conditional Start Event element is added to a Process model, you may replace it with a different starting Request event element:
Start Event element
Start Timer Event element
Signal Start Event element
Message Start Event element
The selected Conditional Start Event element is replaced by the default settings and color of the replacing element.
Follow these steps to replace a Conditional Start Event element with a different Start-type event element:
Select the Conditional Start Event element to change to another Start-type event element. Available options display above the selected element.
Click Confirm. The new element replaces the Conditional Start Event element with its default settings and color.
The Conditional Start Event element has the following panels that contain settings:
Documentation panel
Advanced panel
An element name is a human-readable reference for a Process element. Process Modeler automatically assigns the name of a Process element with its element type. However, an element's name can be changed.
Follow these steps to edit the name for a Conditional Start Event element:
Select the Conditional Start Event element from the Process model in which to edit its name.
In the Name setting, edit the selected element's name and then press Enter.
Enter the Request condition(s) that triggers the Conditional Start Event element, thereby starting a Request. A Conditional Start Event element starts a child Request for a Process when a parent Request sends its Request data to the Conditional Start Event element via a Sub Process element. The Conditional Start Event element triggers when the parent Request's data meets one or more specified conditions.
The Conditional Start Event ignores the call to start a Request in the following scenarios:
The Request condition(s) do not evaluate to the condition(s) set in the Condition setting.
The Request condition(s) evaluates as null
.
The Condition setting contains no value.
A Process model may use multiple Conditional Start Event elements. However, each Conditional Start Event element must use a unique condition for that element to trigger.
Follow these steps to enter the Request conditions that trigger a Conditional Start Event element:
Select the Conditional Start Event element from the Process model in which to edit its name.
Ensure that the Configuration panel displays. If not, show it. Panels to configure this element display.
Enter the Expression Syntax Components that trigger this Conditional Start Event element and then press Enter, thereby starting a Request of its Process.
Describe the element's purpose and how it functions in the Process. This description does not affect Requests for the Process, but may be useful for Process model maintenance such as how the element is configured. Edit information by using the What-You-See-Is-What-You-Get (WYSIWYG) rich text editor.
A Process's entered documentation displays by selecting the View Documentation icon for that Process.
Follow these steps to edit the description for an element:
Select the element from the Process model in which to edit its description.
Ensure that the Configuration panel displays. If not, show it. Panels to configure this element display.
Follow these guidelines to use the WYSIWYG rich text editor to stylize your text:
Select the required text from the Rich Text control.
In the URL setting, enter the destination URL.
In the Text to display setting, edit or enter the text displayed in the Rich Text control.
In the Title setting, enter the text to display when a user hovers over the displayed text.
From Open link in… drop-down menu, select one of these options:
New window: Select this option to open the destination page in a new browser window.
Current window: Select this option to open the destination page in the current browser window.
In the Source setting, enter a URL for the image.
In the Alternative Description setting, enter the text to display if the source URL of the image is not accessible.
In the Width setting, enter the maximum width for the image.
In the Height setting, enter the maximum height for the image.
Click Save.
Format text: Follow these guidelines to format text:
Headings: From the Paragraph/Formats menu, select Headings and then select a heading size.
Bold: Do one of the following:
From the Paragraph/Formats menu, select Inline and then Bold.
Italics: Do one of the following:
From the Paragraph/Formats menu, select Inline and then Italic.
Underline: From the Paragraph/Formats menu, select Inline and then Underline.
Strikethrough: From the Paragraph/Formats menu, select Inline and then Strikethrough.
Superscript: From the Paragraph/ Formats menu, select Inline and then Superscript.
Subscript: From the Paragraph/Formats menu, select Inline and then Subscript.
Code: From the Paragraph/Formats menu, select Inline and then Code.
Paragraph: From the Paragraph/Formats menu, select Blocks and then Paragraph.
Blockquote: From the Paragraph/Formats menu, select Blocks and then Blockquote.
Division: From the Paragraph/Formats menu, select Blocks and then Div.
Preformatted: From the Paragraph/Formats menu, select Blocks and then Pre.
Select one of the color swatches from the color palette. The selected text changes to that color.
Align text: Follow these guidelines to align text:
Left align: Do one of the following:
From the Paragraph/Formats menu, select Align and then Left.
Center align: Do one of the following:
From the Paragraph/Formats menu, select Align and then Center.
Right align: Do one of the following:
From the Paragraph/Formats menu, select Align and then Right.
Justify: Do one of the following:
From the Paragraph/Formats menu, select Align and then Justify.
Process Modeler automatically assigns a unique value to each Process node added to a Process model. However, a node's identifier value can be changed if it is unique to all other nodes in the Process model, including the Process model's identifier value.
All identifier values for all nodes in the Process model must be unique.
Follow these steps to edit the identifier value for a Conditional Start Event element:
Select the Conditional Start Event element from the Process model in which to edit its identifier value.
Ensure that the Configuration panel displays. If not, show it. Panels to configure this element display.
In the Node Identifier setting, edit the Conditional Start Event element's identifier to a unique value from all nodes in the Process model and then press Enter.
Ensure that the Object panel is visible. If not, click the Add icon from the Object bar at the bottom.
Object Category: The Start Event object appears in the Object Category section when it is not pinned.
Click the Elements drop-down menu, and then select the Conditional Start Event option.
The Conditional Start Event element displays.
Click the Elements drop-down menu, and then select the Conditional Start Event option.
The Conditional Start Event element displays.
Click the Elements icon. The Elements drop-down menu displays the Start-type event elements.
Select the element to replace the Conditional Start Event element. The Change Type screen displays to confirm replacing the currently selected element.
Ensure that the Configuration panel displays. If not, show it. The Name setting displays. This is a required setting.
Expand the Configuration panel if it is not presently expanded, and then locate the Condition setting. This is a required setting.
Expand the Documentation panel if it is not presently expanded. The Description setting displays.
In the Description setting, edit the information to display when viewing documentation for this element and then press Enter. Alternatively, use the What-You-See-Is-What-You-Get (WYSIWYG) rich text editor to stylize your text by clicking the More icon.
Undo changes: Click on theicon to undo the last action.
Redo changes: Click on theicon to redo the last undone action.
Insert/Edit Link: Click on theicon to convert the selected text into a hyperlink. Follow these steps to create a hyperlink:
Click on theicon. The Insert/Edit Link screen displays.
Insert/Edit Image: Click on the Insert/Edit Image iconto insert an image. Follow these guidelines:
Click on the Insert/Edit Image icon.
The Insert/Edit Image screen displays:
Toggle the Constrain Proportions iconto maintain the width-height ratio of the image to its original proportion.
Insert Page Break for PDF: Click on the Insert Page Break for PDF iconto insert a page break when a PDF document is created for this documentation if your browser supports this feature.
From the editor toolbar, select theicon.
From the editor toolbar, select theicon.
Change text color: Use the Text Color drop-down to change text color. Click on theicon. The color palette displays. Do one of the following:
Click theicon to select a custom color from the Color Picker.
Click theicon to reset the text to its default color.
From the editor toolbar, use theicon to left-align text.
From the editor toolbar, use theicon to center-align text.
From the editor toolbar, use theicon to right-align text.
From the editor toolbar, use theicon to justify text.
Insert a bullet list: Use theicon to format text as a bulleted list.
Insert a numbered list: Use theicon to format text as a numbered list.
Indent text: Click on theicon to increase text indenting.
Outdent text: Click on theicon to decrease text indenting.
Expand the Advanced panel if it is not presently expanded. The Node Identifier setting displays. This is a required setting.